Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual page 70

Use the following steps to modify the settings of novell-pbserv:
1 Open the following file in an editor:
Windows:
Linux:
2 Edit the configuration settings according to the instructions within the file.
3 Save the changes.
4 On a command line, enter the following:
Windows: In the Services dialog box, right-click Novell ZENworks Preboot Service, then
select Restart.
Linux:
Configuring Novell-zmgprebootpolicy
Novell-zmgprebootpolicy is used to check if there are any imaging actions that need to be performed
on the device. It forwards requests to novell-pbserv on behalf of PXE devices.
Use the following steps to modify the settings of novell-zmgprebootpolicy:
1 Open the following file in an editor:
Windows:
Linux:
2 Edit the configuration settings according to the instructions within the file.
3 Save the changes.
4 On a command line, enter the following:
Windows: In the Services dialog box, right-click Novell ZENworks Preboot Policy Service,
then select Restart.
Linux:
Configuring the DHCP Server
The DHCP server needs to have option 60 (decimal) added to the DHCP tags if the Proxy DHCP
and DHCP servers are running on the same physical server. This option should be a string type and
must contain the letters PXEClient.
For more information, see
Configuring IP Port Usage
This section describes the network ports used by Preboot Services. Using the information in this
section, you can configure routers to correctly forward the network traffic generated by Preboot
Services. For further information about configuring routers, see
Services in a Network Environment," on page
Preboot Services uses both well-known and proprietary IP ports.
The well-known IP ports include:
67 Decimal: The Proxy DHCP server listens on this port for PXE information requests. This is
the same port used by a standard DHCP server.
70 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
%ZENWORKS_HOME%\conf\preboot\novell-pbserv.conf
/etc/opt/novell/zenworks/preboot/novell-pbserv.conf
/etc/init.d/novell-pbserv restart
%ZENWORKS_HOME%\conf\preboot\novell-zmgprebootpolicy.conf
/etc/opt/novell/zenworks/preboot/novell-zmgprebootpolicy.conf
/etc/init.d/novell-zmgprebootpolicy restart
"Configuring LAN Environments for Preboot Services" on page
Section 2.4.2, "Deploying Preboot
60.
64.