Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual page 212

Parameter
TFTPAllowWrites = 0
AllowOverwrites = 0
TFTPLogLevel = 2
TFTPLogFile =
path\novell-tftp.log
TFTPLogFileSize = 15
Novell-tftp is compliant with the following RFCs:
RFC 1350 -- THE TFTP PROTOCOL (REVISION2)
RFC 2347 - TFTP Option Extension
RFC 2348 - TFTP Blocksize Option
RFC 2349 - TFTP Timeout Interval and Transfer Size Options
212 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
Description
This tells the TFTP server whether to allow users to place new files on the
server. Setting this variable to 0 (the default) makes the TFTP server more
secure by not allowing users to place new files on the server. The other option
is 1, which allows users to place new files on the server.
This tells the TFTP server whether to allow users to overwrite existing files on
the server. Setting this variable to 0 (the default) makes the TFTP server more
secure by not allowing users to overwrite files on the server. The other option is
1, which allows users to overwrite files on the server.
TFTPAllowWrites must be set to 1 in order for the AllowOverwrites parameter to
be recognized.
The value assigned here determines which events are entered in
. Specifying a high level in an active system can quickly fill the log.
tftp.log
Valid values are: 0, 1, 2, 3, and 4. The default is 2.
Each message from the TFTP server is assigned a priority level. If
TFTPLogLevel is set to a value equal to or greater than a message's priority
level, that message is entered in
ignored.
Priority meaning:
0: Critical information. Service start, stop, and critical events are logged.
1: Warning information. Only failed client transactions are logged.
2: Transaction information. All completed client transactions are logged.
3: Request information. All client requests and TFTP options are logged.
4: Debugging information. All server events, including each packet received,
are logged.
By default, this parameter is commented out.
The file where all log file entries are placed. The
created in:
Windows: %ZENWORKS_HOME%\logs\preboot
Linux: /var/opt/novell/log/zenworks/preboot
By default, this parameter is commented out.
The size of the log file is controlled by the value of TFTPLogFileSize, where 15
is the default (in MB).
When the log file exceeds the TFTPLogFileSize value, it is deleted and
restarted.
By default, this parameter is commented out.
novell-tftp.log . All other messages are
novell-tftp.log
novell-
file is