Restoring An Image To A Device On A Shared Network Location - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

The Select Partition window allows you to select the image partition to be restored and the
destination drive. You can restore the image of a disk partition on any other disk partition.
If the image to be restored was taken by using ImageX, then all the images stored in the
file are displayed, along with their data size.
If the image was taken by using ZENworks Configuration Management, then only the
information for all the partitions within the
In the Image Partitions panel, select the check box for the image partition to be restored. The
image is restored on the corresponding drive in the Disk Partitions panel. If you want to restore
the image of a partition to a different drive, drag and drop the desired partition in the Disk
Partitions panel so that it is corresponding to the selected image partition. You can also use the
Up and Down arrow keys to reorganize the partitions in the panel.
NOTE: The drives displayed in the Disk Partitions panel might not correlate with the original
drives of the device. You must manually ensure that the correct drive is selected.
7 Click OK.
D.4.5 Restoring an Image to a Device on a Shared Network
Location
The Novell ZENworks Third Party Imaging utility allows you to restore an image to the device on a
shared-network path.
1 (Optional) If you want to change the destination disk structure before restoring a WIM image,
perform the tasks explained in
Restoring a WIM Image," on page
2 Click the Imaging menu > Restore Image > Server.
The Restore Image window is displayed.
3 In the Image File Path field, specify the complete path of the shared-network location
containing the Windows Imaging Format (
restored. The directory must be a Windows share or a Linux CIFS or SMB share.
NOTE: You cannot use the Browse button to select the shared-network path because it is not
supported in the WinPE environment. You must specify the complete path of the network
shared location.
174 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
file is displayed.
.wim
Section D.5, "Configuring the Destination Disk Structure Before
177.
) or the Ghost imaging format (
.wim
.wim
) file to be
.gho