Creating A New Image File - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

Resizing a Partition
You can resize the partitions in a base image, but not an add-on image. For more information, see
"Changing a Partition's Size" on page
Adding a Windows Registry File
(Windows only) To add specific Windows registry settings that are to be applied after the open
image is laid down:
1 Click File > Open.
The default image location (
2 Browse for and select the image file.
Large image files might take a few moments to open.
3 Select a partition.
4 Click Image > Add Registry File.
5 Select the registry (
.reg)
The registry file is added to a fixed, known area of the partition and is applied by the
ZENworks Imaging Windows Agent (ziswin) when the device reboots after receiving the
image.
E.1.10 Creating a New Image File
Do the following to create a new image file:
"Creating, Configuring, and Saving the New Image File" on page 193
"Selecting New Image File Options" on page 193
Creating, Configuring, and Saving the New Image File
1 Click File > New.
2 Configure the new image file using the instructions in
page 193, then return to
3 To save the new image file, click Save As.
For Windows, the default image location should open (
For Linux, the file browser opens to the
directory for saving the file.
images
If you have a subdirectory structure under
file.
4 Specify an image filename, including the
Selecting New Image File Options
You can do the following in this new image file:
"Adding Partitions" on page 194
185.
...\content-repo\images
file that contains the settings, then click Add.
Step 3.
.../content-repo
images
filename extension, then click Save.
.zmg
) should open.
"Selecting New Image File Options" on
...\content-repo\images
directory; you need to click the
, browse for where to save the new image
Imaging Utilities and Components 193
).
/