Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual page 214

Parameter
PolicyLogLevel = 1
PolicyLogFile =
path\novell-
zmgprebootpolicy.log
PolicyLogFileSize = 15 The size of the log file is controlled by the value of PolicyLogFileSize, where 15
PrebootServer =
10.0.0.5
EnableAMTSupport =
Yes
Understanding the Arguments
The following arguments are available for each of the Preboot Services daemons described above
for Linux servers. Windows equivalents are noted.
214 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
Description
The value assigned here determines which events are entered in
zmgprebootpolicy.log
quickly fill the log. Valid values are: 0, 1, 2, 3, and 4. The default is 2.
Each message from the novell-zmgprebootpolicy server is assigned a priority
level. If PolicyLogLevel is set to a value equal to or greater than a message's
priority level, that message is entered in
All other messages are ignored.
Priority meaning:
0: Critical information. Service start, stop, and critical events are logged.
1: Warning information. Only failed client transactions are logged.
2: Transaction information. All completed client transactions are logged.
3: Request information. All client requests are logged.
4: Debugging information. All server events, including each packet received,
are logged.
By default, this parameter is commented out.
The file where all log file entries are placed. The
zmgprebootpolicy.log
Windows: %ZENWORKS_HOME%\logs\preboot
Linux: /var/opt/novell/log/zenworks/preboot
By default, this parameter is commented out.
is the default (in MB).
When the log file exceeds the PolicyLogFileSize value, it is deleted and
restarted.
This field contains the address of the Imaging Server that should be used to
resolve policies.
By default, this parameter is commented out.
This feature is not currently supported in Novell ZENworks Configuration
Management.
This field enables or disables support for Intel's AMT technology.
By default, this support is disabled by commenting out the parameter.
. Specifying a high level in an active system can
novell-zmgprebootpolicy.log
novell-
file is created in:
novell-
.