Action - Third Party Image; Adding A Third-Party Image; Editing A Third-Party Image - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

A.5 Action - Third Party Image
Depending on which dialog box you accessed, you can either add a new Third-Party Image action to
the current bundle's Preboot actions, or edit an existing Third-Party image.
Section A.5.1, "Adding a Third-Party Image," on page 152
Section A.5.2, "Editing a Third-Party Image," on page 152
A.5.1 Adding a Third-Party Image
1 Specify an image name in the Action Name field.
2 In the Image Type drop-down list, select the type of the image to be used in the bundle. The
available options are Windows Image Format (.WIM) and Ghost Image Format (.GHO).
3 In the Shared Network Path for Image File field, specify the shared-network path where you
want to save the
CIFS share.
If the Novell File Upload extension is not installed on the device, you must install it before you
can browse to and upload the file.
4 In the Network Credential field, click
used for accessing the device that has
5 If you want to use the WIM bundle as an add-on image, select the Restore WIM as Add-On
option and configure the following options:
Image Number (WIM Only): Select the index number of the image to be restored
Path to Restore the Add-on Image: Specify the location on the device where you want
to restore the add-on image.
6 Click OK to create the new third-party Image action.
A.5.2 Editing a Third-Party Image
1 In the Action Name field, edit the existing name as needed.
152 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
or . files. The directory must be a Windows share or a Linux Samba/
.wim gho
to browse for and select the network credentials to be
.wim
or . files.
gho