Using The Image-Safe Data Viewer - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

Category
Workstation Identity
Information
Network Information
Production DNS Information
Intel iAMT Information
E.4.2 Using the Image-Safe Data Viewer
To use
zisview
Data Viewer Commands
Table E-2
Command
zisview
200 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
Information
If the device is a member of a Management Zone or there is image-safe
data present:
Zone GUID: The Management Zone that contains the device, if it
has been imported.
Device GUID: The Globally Unique Identifier of this computer's
device.
Device Index: The device identification number.
If the device is not a member of a Management Zone and image-safe data
is not present:
Workstation Tree: The tree that contains the device, if it has been
created in a tree.
Workstation DN: The device's DN, if known.
Workstation ID: The device identification number, if known.
For all devices:
Win 9x Computer Name: The computer name for the device.
Windows Workgroup: The Microsoft network workgroup of the
device.
Windows SID: The Windows Security ID of the device, which is a
unique number that identifies this device in Windows.
DHCP: Displays whether this device uses DHCP to obtain its IP
address.
IP Address: The static IP address that this device uses.
Gateway: The gateway that this device uses.
Subnet Mask: The subnet mask that this device uses.
DNS Servers: The number of DNS nameservers used for DNS
name resolution.
DNS Suffix: The DNS context of the device.
DNS Hostname: The DNS local hostname of the device. Use this
field to change the computer name of the device.
iAMT Enterprise Name.
, enter any of the following commands at the imaging maintenance mode prompt:
Explanation
Displays all image-safe data.