Using The Bundles Tab To Assign Bundles - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

For information on adding to a new group, see
Configuration Management Software Distribution
5 Click Add to open the Select Groups dialog box.
6 Select the groups and click OK.
7 Repeat this step as necessary to include the desired groups, then click Next to display the
Summary page.
8 Review the configuration, then click one of the following:
Back: Allows you to make changes after reviewing the summary.
Finish: Click to make the assignments.
When devices assigned to any assigned Bundle Group boot, they are imaged from the image
contained in the Imaging bundle that is assigned to the group.

3.4.3 Using the Bundles Tab to Assign Bundles

To assign a bundle to devices or bundle groups:
1 In ZENworks Control Center, click Bundles in the left pane to display the Bundles panel.
2 In the Name column, click the bundle to be assigned to open its properties.
3 Click the Relationships tab.
4 To assign the bundle to devices, in the Device Assignments panel, click Add, then do the
following:
4a In the Select Objects dialog box, select the devices to be assigned, then click OK to
display the Devices to be Assigned page:
136 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
"Creating Bundle Groups" in the
Reference.
ZENworks 10