Set Up The Switch In Your Network And Power On The Switch - NETGEAR GS110EMX User Manual

8-Port Gigabit Ethernet Plus Switch with 2-Port 10G/Multi-Gig Uplinks GS110EMX
Set up the switch in your network and power
on the switch
Before you set up the switch in your network, we recommend that you review the
information in the following table, which describes the network cables that you can use
for the switch connections and the speeds that these cables can support, up to 100
meters (328 feet).
Table 3. Cables and speeds
Speed
100 Mbps
1 Gbps, 2.5 Gbps, or 5 Gbps
10 Gbps, up to 55 meters (180 feet)
10 Gbps, more than 55 meters (180 feet)
Figure 5. Sample connections
Install and Access the Switch in
Your Network
Cable Type
Category 5 (Cat 5) or higher rated
Category 5e (Cat 5e) or higher rated
Category 6 (Cat 6) or higher rated
Category 6A (Cat 6A) or higher rated
16 User Manual