Show Igmpsnooping - NETGEAR ProSafe GSM5212P Software Administration Manual

ProSafe Managed Switch
Web Interface: Enable IGMP Snooping
1. Configure IGMP snooping:
a. Select Switching > Multicast > IGMP Snooping Configuration. A screen similar to
the following displays.
b. For Admin Mode select the Enable radio button.
c. For Unknown Multicast Filtering, select the Enable radio button.
d. Click Apply.

Show igmpsnooping

The example is shown as CLI commands and as a Web interface procedure.
CLI: Show igmpsnooping
(Netgear Switch) #show igmpsnooping
Admin Mode..................................... Disable
Unknown Multicast Filtering.................... Disable
Multicast Control Frame Count.................. 0
Interfaces Enabled for IGMP Snooping........... None
VLANs enabled for IGMP snooping................ None
Chapter 13. IGMP Snooping and Querier | 217