Canon imagePROGRAF W6400 User Manual page 92

Printing with Rolls
8
While gently pulling out the center of the
leading edge (e) of the roll media, align the
right edge of the media so it is parallel to
guideline (f), then pull the release lever to the
front to close it.
Important
Do not pull strongly the roll media when you align it
with the guideline. The roll media may not feed out
straight in some cases.
9
Raise the upper cover stopper to release the
lock then close the upper cover.
Media Type is displayed.
2- 30
10
Press [
type, then press OK.
Media Type
HW Coated
The (=) mark to the left of a setting indicates that roll
media type is currently selected, then the
preparation for the select media begins.
The table below lists the settings for the media
types. Only the types of media that can be used with
the black ink tank installed in the printer are
f
displayed.
Media Name
e
Plain Paper
CAD Plain Paper
Plain Paper (High Quality)
Recycled Coated Paper
Coated Paper
Heavyweight Coated Paper HW Coated
Premium Matte Paper
Extra Heavyweight Coated
Paper
Glossy Photo Paper
SemiGlos Photo Paper
Heavyweight Glossy Photo
Paper
Heavyweight SemiGlos
Photo Paper
Synthetic Paper
Adhesive Synthetic Paper
Backlit Film
Flame-Registrant cloth
] or [ ] to select the loaded media
Media Type Setting
Plain Paper
CAD Plain Paper
Plain Paper HQ
Recycled Coated
Coated Paper
Premium Matte
Ex HW Coated
Glossy Photo
Semi-Gl Photo
HW Glossy Photo
HW SemiGl Photo
Syn. Paper
Adh. Syn. Paper
Backlit Film
Flame-Res.Cloth
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index