Canon imagePROGRAF W6400 User Manual page 30

Function Menus
Menu Item
Keep Media Size
Chk Remain. Roll
1- 27
Setting Values
Off*, On
Off, On*
Function
When switched to On, the print job executes
with the media size specified for the data.
Depending on the size of the margins, some
of the data may be cut off.
When set to Off, the job will print without
cutting off part of the image at the top or
bottom. However, the printout will be
extended by the lengths of the top and
bottom margins.
Important
When On, part of the image may be cut off.
(→ P.7-5)
When set to Off, the image inside 5 mm
from the top, bottom, left, and right edges
will be printed clearly as the recommended
printing area. However, the printout will be
extended by the lengths of the top and
bottom margins.
When On, the bar code prints when the roll
is removed in order to monitor the amount of
media remaining on each roll.
When Off, the bar code is not printed when
the roll is removed. If this is set to Off, the
edge will be cut off regardless of the roll
paper loading position.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index