Page Setup Sheet - Canon imagePROGRAF W6400 User Manual

Printer Driver

Page Setup Sheet

The Page Setup sheet provides the following settings.
Sets the size of the page for the print
Page Size
data.
Prints the image with no margin at the
Borderless four edges of the sheet. There are
Printing limitations on the width and type of
media. (→ P.2-4, P.3-13, P.3-77)
1- 37
Enlarged/ Allows you to enlarge or reduce printing.
Reduced You can select one of the following
Printing methods to do this.
Automatically sets the enlargement/
Fit Media
reduction proportionally to match the
Size
size selected for the Media Size.
Automatically sets the enlargement/
Fit Roll
reduction proportionally to match the
Paper Width
size selected for the Roll Paper Width.
Allows you to scale the size of the image
Scaling
manually in the range 5% to 600%.
Allows you to specify the actual size of
Media Size
the media where the job will print.
Allows you to select either portrait or
Orientation
landscape printing.
Rotate Page 90 Automatically rotates the image 90
degrees degrees when print job would result in a
(Conserve printout with the length smaller than the
Paper) width. This saves paper.
Specifies whether roll media, roll media
Media Source
(banner), or cut sheets will be used.
Roll Paper Specifies the width of the roll paper to be
Width used.
Specifies whether the sheet is cut after
Auto Cut...
printing.
Allows you to define free sizes other
Size Options than the standard sizes so you can print
do long prints.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index