Netware Settings; Appletalk Settings - Canon imagePROGRAF W6400 User Manual

List of Network Settings
Item
Secondary DNS Secondary DNS Server IP
Server Address Address.
Printer Host Name
DNS Host Name
(Range: 1 to 63 chars.)
DNS Domain Printer Domain Name
Name (Range: 0 to 64 chars.)
Printer Multicast DNS
Multicast DNS
Service Name
Service Name
(Range: 1 to 63 chars.)

AppleTalk Settings

Item
The name of the phase type
Phase Type in use (determines whether
AppleTalk is used.)
The names of the printers
displayed in the Chooser and
Name
Printer Center lists
(Name length: 1 to 31 chars.)
The name of the printer zone
Zone
(Name length: 1 to 31 chars.)
5- 49
Initial
Content
Value
0.0.0.0
NB-15FB
xxxxxxxxx
xxx
Blank
Canon
W6400P
G (xxxxxx)
Initial
Content
Value
Disabled
Canon
NB-15FB
(xxxxxx)
*

NetWare Settings

Item Content
The frame type used by
Frame Type
NetWare.
Determines whether the NCP
burst mode is used.
NCP Burst Mode
(Normally, leave this setting
on.)
The print service to use.
Print Application (Only one print service can
be selected and enabled.)
Determines whether the
Packet packet sign is used
Signature (normally leave set to If
Requested by Server)
Bindery PServer
Name of the NetWare file
File Server server of the NetWare print
Name server.
(Range: 0 to 47 chars.)
The name of the NetWare
Print Server
print server in use.
Name
(Range: 0 to 47 chars.)
The password required by
Printer Server
the print server setting.
Password
(0 to 20 chars.)
The time interval between job
Polling Interval confirmations.
(Range: 1 to 15 sec.)
TOP
Chapter 1
Basic Procedures
Initial Value
Disabled
Chapter 2
Using a Variety of
Media
ON
Chapter 3
Printing Methods for
NDS
Different Objectives
PServer
Chapter 4
Maintaining the
If Requested
Printer
by Server
Chapter 5
Using the Printer in a
Network Environ-
ment
Blank
Chapter 6
Troubleshooting
Blank
Chapter 7
Operation of the
Function Menus
Blank
Contents
5
Index