Canon imagePROGRAF W6400 User Manual page 25

Function Menus
Menu Item
Skew Check Lv.
Width Detection
Return Defaults
ChangeBkInkType
Rep. Ink Tank
Adjust Printer
Auto Head Adj.
Advanced Adj.
1- 22
Setting Values
Standard*, Loose, Off
On*, Off, Media Size?
No, Yes
No, Yes
No, Yes
No, Yes
Function
When you are printing on Japanese washi
paper or other media of non-standard width,
you can lower the amount of skew detected
or switch this function off. However, if you
switch this function Off, you could cause a
paper jam if the sheet is not loaded perfectly
straight.
Important
If media is set at a skewed angle while Off,
this could cause jams or fouling the platen.
The Width Detection function can be
switched to Off only when printing on cut
sheets. You can switch width detection off for
Japanese washi or other media of non-
standard widths. If you switch this function
Off, then Media Size? is displayed and you
can enter the width of the media.
This function restores the media type
settings to their default values.
You can switch the black ink tanks based on
the requirements of the print job for different
types of black ink.
When you must change an ink tank during a
print job, the required processing is done so
you can change the ink tank. This menu is
displayed during printing only.
Adjusts the printhead. (→ P.4-40)
Prints the pattern used to adjust nozzle
gaps, print direction, and color gaps; the
printer reads the printed pattern and does
the adjustments automatically based on the
results of the printout.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index