Canon imagePROGRAF W6400 User Manual page 357

When You Cannot Print
Solution2: Mac OS X:
1. Open Network for System Preferences.
2. Under Show, select the name of the LAN port
where the printer is connected.
3. Open the AppleTalk panel and make sure
that Make AppleTalk Active is checked on.
4. Open Printer Setup Utility (Print Center)
and make sure that the name of this printer is
displayed in the printer list. If the name is not
displayed, click the Add button to add the
name of the printer.
5. If the name of the printer does not display
after clicking the Add button, use the pro-
vided User Software CD-ROM to reinstall the
printer driver for the printer.
6- 25
Cannot print from the NetWare network.
Problem1: The printer LAN port and cable are not
connected correctly.
Solution1: Confirm that the connection of the cable that
connects the printer to the network is secure,
then press the Power button to cycle the printer
→
off and on again. (
Problem2: The printer cannot recognize automatically the
LAN communication method.
Solution1: Use the printer operation panel to select
Interface Setup > Ethernet Driver then set
each item for the communication method that is
being used on the LAN. (
Problem3: The NetWare network is not set correctly.
Solution1: Confirm the following points:
1. Make sure that the NetWare file server is run-
ning.
2. Is there enough disk space available on the
NetWare file server? You may not be able to
perform large print jobs if there is not enough
free space available.
3. Start NWADMIN or PCONSOLE and confirm
(1) that the print service is set correctly, and
(2) that the print queue has been enabled for
→
use. ( P.5-38)
4. Make sure that the printer network settings
are correct. Especially, confirm that a frame
type is enabled for the Frame Type setting.
→
( P.5-20, P.5-34)
P.5-5)
→
P.5-5)
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index