Canon imagePROGRAF W6400 User Manual page 180

Printing from Macintosh
8
Under Enlarged/Reduced Printing select Scaling then specify the desired setting.
Important
This function cannot be used when Borderless Printing is selected.
You can enter a setting for the rate of magnification manually from the keyboard or use the arrow button on the right to
scroll the number settings up or down. The rate can be changed in increments of 1%. The size can be scaled in the
range limited by the size of the scaling entry column displayed on the right.
You can perform a setting that is larger than the size of the media loaded in the printer, but some portions will be cut off
and not printed.
To center an image in the upper left for printing, on the Finishing panel select Print Centered.
9
Check the value displayed for Media Size.
10
Confirm the content of the preview, then click the Print button.
The print job starts.
3- 76
TOP
トップ
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index