Canon imagePROGRAF W6400 User Manual page 316

NetWare Settings (Windows)
3
Select the type of frame you are using for
NetWare Frame Type, select ETHERNET II
for TCP/IP Frame Type, enter the assigned
settings for IP Address, Subnet Mask and
Gateway Address, then click the Set button.
Note
The IP address setting is required here to allow the
printer protocol setting to be performed with the Web
browser (Remote UI).
4
Click the OK button when the confirmation
message is displayed.
5- 35
5
When you are finished performing the
settings, select Exit from the Printer menu.
Setting with the Printer Operation Panel
The NetWare network information can be set on the
printer operation panel.
1
Press the Online button to display MAIN
MENU.
MAIN MENU
Head Cleaning
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
2
Press [ ] or [ ] to select Interface Setup
then press [ ].
MAIN MENU
↓
Interface Setup
3
Press [ ] or [ ] to select NetWare, then
press [ ].
Interface Setup
NetWare ↓
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index