Canon imagePROGRAF W6400 User Manual page 332

Software Applications that can be used for Network Settings
Software Applications that can be used for Network Settings
Use the following listed software to perform the network settings.
Type of Setting
Setting IP Addresses
→
( P.5-7)
Set TCP/IP protocol
→
( P.5-15)
Setting AppleTalk protocol
→
( P.5-25)
Setting the NetWare printer
service
→
( P.5-37)
Setting the NetWare protocol
→
( P.5-40)
*1. Only these settings are allowed: IP address, subnet mask, default gateway, DHCP,
BOOTP, RAPP, frame type, phase settings.
*2. Only phase settings are possible.
*3. Only frame type are possible.
5- 51
GARO Device Web Browser
Setup Utility (Remote UI)
*1
*2
*3
Printer
ARP/PING
operation
command
panel
*1
*2
*3
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index