Canon imagePROGRAF W6400 User Manual page 337

Responding to Error Messages
End of Roll
Problem1: The roll media has run out.
Solution1: Perform the procedure below to load the same
size and type of roll media in use. (
1. Load the size and type of roll in use.
2. Select the media type.
3. Select length if the media remaining detection
feature for roll media is on.
4. Press the OK button.
6- 5
RllMed.Shortage
Replace RllMed.
Problem1: The length of the media required for the received
print job is longer than the amount of media
remaining on the roll.
→
P.2-26)
Solution1: Follow the procedure below to load a new roll in
the printer. (
1. Load a new roll of the size and type to be
2. Select the Media Type.
3. If the roll remaining media function is on,
4. Press the OK button.
Solution2: Hold down the Stop/Eject button for more than 1
second to stop printing.
→
P.2-26)
used.
select the length of the media.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index