Canon imagePROGRAF W6400 User Manual page 46

Printing
Important
If the printer is connected to a network, make sure that
Active is selected for AppleTalk.
The network interface card used with this printer is not
set before shipping for use with AppleTalk. On the
printer operation panel, select Interface Setup >
AppleTalk > On. (→ P.5-30)
For an IP print connection, register the IP address
under Registering IP Address and then select the
name of the printer under IP Print.
3
Close the Chooser window and click the OK
button in the message window.
This completes the selection of the printer.
1- 43
For Mac OS X
If you are using Mac OS X, user the printer setting utility
to select the printer from the Print Center. This printer will
not be displayed in the list if it is not switched on, or if the
printer cable is disconnected. Start the print job after you
confirm that the printer is in working order.
The example here describes Mac OS X Ver. 10.3. The
icon name and graphic may be different for other ver-
sions.
1
Select Finder, then select Utility or
Applications from the Go menu.
2
Open the Utilities folder then open Printer
Setup Utility (Print Center).
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index