Canon imagePROGRAF W6400 User Manual page 39

Printer Driver
High:
This print mode places priority on
quality.
Standard:
Prints the printout with normal quality.
Draft:
Print Quality This print mode places priority on
speed.
Custom Settings:
The job is printed with the processing
method selected by the user. The
Highest selection prints with the best
possible quality.
With Print Quality selected under
Custom Settings, the processing
methods for Print Quality, Resolution,
Enhance Text With Photos, and
Set
Halftones can be set. The items that
can be selected and their settings are
different, depending on the media type
and ink type.
1- 36
Color:
Uses all the inks to print the job in color.
Monochrome (Photo):
Provides stable monochrome photo
printing with minimal tone change and
enables detailed adjustment of gray
scale gradations and color tones.
Monochrome:
Color Mode Converts all print data to grayscale and
prints using only the black ink.
Solid Color:
Solid colors are printed differently so
they stand out, light color lines print
sharp.
Black Only:
All areas other than white are printed in
black.
Manual Allows manual adjustment of color
Color balance, saturation, brightness, and
Settings contrast.
Open Preview After executing the print job, check the
When Print Job image of the on the screen and then
Starts execute the print.
Follow the procedure below to start the
Status Monitor
Status Monitor.
Displays the version number of the
Version Info.
printer driver.
Returns the settings on the sheets to
Defaults
their initial (default) settings.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index