Checking The Condition Of The Printer - Canon imagePROGRAF W6400 User Manual

Checking the Condition of the Printer

Checking the Condition of the Printer
When you see that the printouts are faded and uneven, or
streaked with white lines, print a nozzle check pattern to
determine whether the nozzles are blocked. Before you
print a nozzle check pattern, make sure roller paper or cut
sheets A3 (L) size or wider are loaded in the printer.
Note
If you are using cut sheets, make sure at least one
sheet of unused A3 paper (not the blank sides of used
paper) or larger are set.
1
If the printer power is off, press the Power
button to switch the printer on.
Data
Message
Within a short time, Online or Offline is displayed.
4- 36
Information Power
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
Offline
Menu
2
Press the Online button to display MAIN
MENU.
MAIN MENU
Head Cleaning
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
3
Press [ ] or [ ] to select Test Print then
press [ ].
MAIN MENU
↓
Test Print
4
Press [ ] or [ ] to select Nozzle Check,
then press OK button.
Test Print
Nozzle Check
The nozzle check pattern prints. The printer returns
to the online mode and displays Online in the
display as soon as printing completes.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index