Canon imagePROGRAF W6400 User Manual page 51

Canceling a Print Job
3
With the job selected for deletion, click the
Printing Paused button again.
The print job is deleted.
4
Select Resume Printing from the File menu.
The printer re-enters print mode and is ready for
operation.
1- 48
Important
After you have paused printing, you must select
Resume Printing. Printing cannot be done while the
print queue is paused (with the red dot displayed).
5
If the print in progress display on the printer
does not go off and online lamp is flashing,
press and hold the Stop button for 1 sec.
Information Power
Data
Message
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
Offline
Menu
The print job in progress is canceled.
6
If the Data lamp goes off and you cannot
cancel the print job, hold down the Power
button for at least 1 second, release it after
the Shut down.. message appears, then
after the printer switches off, switch it on
again.
All of the print data currently processing in the printer
is lost after the printer is switched off. Any print job
required must be restarted.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index