Using Ftp To Print - Canon imagePROGRAF W6400 User Manual

Printing with UNIX

Using FTP to Print

1
Start at the MS-DOS prompt or command
line.
If you are using UNIX, open the Console screen.
2
Execute the following commands.
ftp <Printer IP Address>
3
Enter any user name.
Just press the Enter key without entering a
password.
You can perform the procedure below.
•To print a file:
put <filename to print>
Note
Print the file in binary mode.
5- 46
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index