Canon imagePROGRAF W6400 User Manual page 24

Function Menus
Menu Item
Far End RollMrgn
Media Thickness
VacuumStrngth
Standard Cutter
Cut speed
CutDustReduct
Correct Smear
1- 21
Setting Values
10mm, 5mm
Thick, Standard, Thin
Weak, Standard, Strong, Strongest
Enable, Disable
Standard, Fast
Off*, On
Off*, On
Function
Sets the amount of white space to ensure
the quality of printing at the trailing edge.
Important
If set to 5 mm, the print quality at the
leading edge, or the accuracy of feeding,
may deteriorate, or the surface of the print
may be scratched. Also, ink may stick to
the leading edge.
Selects the ideal thickness for the media
type. The printhead alert will display based
on the value of this setting.
Sets the amount of suction on the media on
the platen.
Determines whether the standard, flat blade
cutter is enabled.
Sets the speed of the cutter cutting the
media. Selecting Fast for film and other
media that easily generates cutting dust will
reduce the amount of dust.
When printing on film or other media that
creates a large amount of dust during
cutting, a line is printed at cutting position to
reduce the amount of scattered dust.
Select for media when the printing results is
easily scratched.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index