Canon imagePROGRAF W6400 User Manual page 23

Function Menus
Menu Item
Med. Detail Set
Media Type
Drying Time
Scan Wait Time
NearEnd RllMrgn
1- 20
Setting Values
Plain Paper*, CAD Plain Paper, Plain
Paper HQ, Recycled Coated, Coated
Paper, HW Coated, Premium Matte,
Ex HW Coated, Glossy Photo, Semi-
Gl Photo, HW Glossy Photo, HW
SemiGl Photo, Syn. Paper, Adh. Syn.
Paper, Backlight Film, Flame-Res.
Cloth, Proofing Paper, News Proof 1,
News Proof 2, News Proof 3, FineArt
Photo, FneArt HW Photo, FineArt
Txtr, Canvas Semi-Gl, JPN Paper
Washi, Colored Coated, CAD Trace
Paper, CAD Matte Film, Special 1-5
Off, 30 sec., 1 min., 3 min., 5 min, 10
min., 30 min., 60 min.
Off, 1 sec., 3 sec., 5 sec., 7 sec., 9
sec.
20mm, 5mm
Function
These are the names of media that you can
select. Only the names of the types of media
that can be used with the set ink tank are
displayed.
An ink drying time interval for each media is
set to allow enough time for a printout to dry
before the next sheet prints.
The printhead can be set to pause after one
pass (a scan) and wait for the ink to dry (this
allows for the absorption properties of
different media). However, the printing time
will be much longer.
This sets the amount of white space to
ensure the quality of printing at the leading
edge.
Important
If set to 5 mm, the print quality at the
leading edge, or the accuracy of feeding,
may deteriorate, or the surface of the print
may be scratched. Also, ink may stick to
the leading edge.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index