Canon imagePROGRAF W6400 User Manual page 356

When You Cannot Print
Problem4: The computer and the printer are not on the
same network.
Solution1: If the number of routers are exceeded with the
Zeroconf function, the computer cannot connect
to the printer if it is on a different network.
Connect the computer and printer to the same
network. For more about the network settings,
please contact the network manager.
Problem5: The settings for the computer used for printing
are not set correctly.
Solution1: Mac OS 8.6/9x:
1. Open Chooser from the Apple menu.
2. Under AppleTalk make sure that Active is
selected.
6- 24
3. Under AppleTalk in the Control Panels of
the Apple menu, make sure that the printer is
selected for connection to the correct port for
the destination.
4. In Chooser make sure that the GARO Printer
Driver is installed.
5. In Chooser, select GARO Printer Driver,
and under Destination select AppleTalk,
then select again the name of the printer in
the printer list.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index