Canon imagePROGRAF W6400 User Manual page 119

Printing from Windows
4
Display the Page Setup sheet and perform the settings for borderless printing.
Note
If you change the page size to any other size that allows borderless printing, the setting for the width of the roll changes
automatically to a roll width that matches the original width.
If you change the page width setting to a size that does not allow borderless printing, the dialog box below opens.
Specify a setting in the Roll Paper Width list, then click the OK button so you can continue with the borderless print (in
this case the width of the original will be enlarged or reduced to fit the width of the roll media). The print cannot be
performed with the same width as the original.
3- 15
1. For Page Size select the size of the original created in the
software application.
2. Select Borderless Printing.
* If you select the paper for a size that can be used for
borderless printing, Scale to fit the Page Size is set for
Borderless Printing Method.
3. Confirm that the width of the roll paper matches the roll
paper or the page size for Media Source.
* The Preview reflects changes in the contents of the settings.
TOP
トップ
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index