Cleaning The Printer; Cleaning The Exterior Covers - Canon imagePROGRAF W6400 User Manual

Cleaning the Printer

Cleaning the Printer
Clean the printer periodically to maintain high print quality
and to avoid problems.
Obey the following precautions when you clean the printer.
Caution
When you clean the printer, always switch the printer
off and unplug its power cord from the power supply. If
the printer is accidentally switched on while you are
cleaning it, moving parts inside the printer could cause
personal injury if you are touching them.
Never use a flammable liquid like thinner, benzene,
alcohol, etc. to clean the printer. If such combustible
materials come into contact with electrical component
inside the printer, this could cause a fire or electrical
shock.

Cleaning the Exterior Covers

During normal use the printer surfaces require cleaning at
least once a month.
1
Hold down the Power button for more than 1
sec. to display Shut Down.. then switch the
printer off.
Data
Shut Down..
Please Wait..
Message
4- 10
Information Power
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
Offline
Menu
2
Disconnect the power cord at the power supply.
3
Dampen a clean cloth, wring it out
completely, then use it to clean dirt and
paper dust from the printer exterior surfaces,
feed slot (a), and power cord plug, then wipe
the cleaned surfaces with a dry cloth.
4
Insert the plug of the power cord into the power
source.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
a
Chapter 7
Operation of the
Function Menus
Contents
Index