Canon imagePROGRAF W6400 User Manual page 114

Printing from Windows
Note
If you do not see the checkbox for Enlarged/Reduced
Printing, then cancel the Borderless Printing
selection. The Enlarged/Reduced Printing checkbox
will appear.
5
Under Enlarged/Reduced Printing select
Fit Roll Paper Width.
Note
Under Enlarged/Reduced Printing select Fit Roll
Paper Width to open the dialog box below. From the
Roll Paper Width list select the width of the roll
loaded in the printer, then click the OK button.
3- 10
6
Confirm the content of the settings Preview,
then click the OK button.
Note
To achieve the best print results, you should confirm
the appearance of the original in the Print Preview
before printing. For more details about how to display
the print preview, please refer to
Image (Print Preview)" in "Before You
(→ P.3-5)
7
Click the Print button in the Print dialog box.
The print job starts.
Note
Before you start the print job, confirm that the width of
the roll selected in the printer driver is the same as the
width of the roll loaded in the printer. If the printer
driver setting does not match the width of the loaded
roll, the print job will halt temporarily.
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
"Confirming the Print
Begin".
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
TOP
Contents
Index