Canon imagePROGRAF W6400 User Manual page 186

Printing from Macintosh
Note
For more about how to enlarge or reduce while
performing borderless printing, please refer to
"Enlarge/Reduce to fit Roll Paper Width"
perform borderless document printing with a size not
allowed for borderless
If Scale to fit the Page Size is selected for borderless
printing, the printer driver automatically enlarges the
original by 3 mm at the top, bottom, left, and right margin.
The result is the printer fills the margins on the entire
page with borderless printing.
The top, bottom, left and right margins of the original
are set to 3 mm so no part of the image will extend
beyond a margin.
To perform a borderless print of an image with a top and bottom margin, on the Finishing panel you can select No
Spaces at Top or Bottom (this is an easy way to perform a borderless print by setting these margins to zero). For
more details, please refer to
3- 82
under "<To
printing>". (→ P.3-83).
"Printing without Top and Bottom Margins (Conserve Paper)". (→ P.3-100)
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index