Canon imagePROGRAF W6400 User Manual page 364

Unexpected Printing Results
Color Tones Uneven
Problem1: The color adjustment for the printer driver has
not been performed.
Solution1: Use the printer driver to adjust the colors with the
settings on the Color Settings of the Color
Mode dialog box.
→
( Printer Driver Online Help)
Problem2: The computer and monitor have not been
adjusted correctly for color.
Solution1: Perform monitor color correction.
→
( Monitor Instruction)
Solution2: The color management setting in the software
application is not set correctly.
→
( Software Application Instructions)
Problem3: Color ink tank nozzle is clogged.
Solution1: Print a nozzle check pattern to confirm the
condition of the printhead. If a print head nozzle
is blocked, perform the printhead cleaning
→
procedure. (
Problem4: A color ink tank is inserted in the wrong slot.
Solution1: On the printer operation panel, execute Move
Printer, remove the ink tank from the printer,
then insert the correct color ink tank.
→
( P.4-32, Quick Start Guide)
Solution2: After performing the above procedure, execute
Nozzle Check. If each color is not printing
correctly, on the printer operation panel execute
Head Cleaning B (
6- 32
P.4-36, P.4-38)
→
P.4-36, P.4-38)
Problem5: Yellow ink is smearing.
Solution1: On the operation panel select Med. Detail Set. >
Correct Smear > On. (
Image color borders printing thick
Problem1: Ink is clogged in a nozzle.
Solution1: On the Layout sheet of the printer driver, under
Special Settings set SSC Adjustment to Level
1, then execute the print job again. If printing at
Level 1 does not solve the problem, select Level
2 and perform the print again. However, please
remember that using this feature can cause
changes in the color hues over the entire image
so you should check the hues as you are
printing.
Image edges are faint.
Problem1: The setting of the vacuum fan is too strong.
Solution1: Select a weaker setting for the vacuum fan.
However, this solution does not apply to printing
of a high-precision image.
→
P.1-21)
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index