Canon imagePROGRAF W6400 User Manual page 100

Printing with Cut Sheets
4
Press [ ] or [
media type then press OK.
Media Type
HW Coated
The (=) mark to the left of a setting indicates that cut
sheet type is currently selected, then the preparation
for the select media begins.
The printer detects no skew and if there is no
problem, then the printer enters the print standby
mode.
The table below lists the possible settings for the cut
sheet type. Only the settings of the type of media
that can be used with the type of black ink tank
mounted in the printer are displayed.
Media Name
Plain Paper
CAD Plain Paper
Plain Paper (High Quality)
Recycled Coated Paper
Coated Paper
Heavyweight Coated Paper HW Coated
Premium Matte Paper
Extra Heavyweight Coated
Paper
Glossy Photo Paper
SemiGlos Photo Paper
Heavyweight Glossy Photo
Paper
Heavyweight SemiGlos
Photo Paper
Synthetic Paper
2- 38
] to select the name of the
→
Media Type Setting
Plain Paper
CAD Plain Paper
Plain Paper HQ
Recycled Coated
Coated Paper
Premium Matte
Ex HW Coated
Glossy Photo
Semi-Gl Photo
HW Glossy Photo
HW SemiGl Photo
Syn. Paper
Adhesive Synthetic Paper
Backlit Film
Flame-Resistant cloth
Proofing Paper
Newsprint for Proofing
Fine Art Photo
Fine Art Heavyweight Photo FneArt HW Photo,
Fine Art Textured
Canvas SemiGlos
Japanese Paper Washi
Colored Coated Paper
CAD Tracing Paper
CAD Translucent Matte Film CAD Matte Film
Special 1~5
Important
If the cut sheet is skewed, this will cause a skew error.
If a skew error occurs, start at Step 1 and set the cut
sheet again.
Make sure that you have selected the correct setting
for the media type. If you have selected an incorrect
setting for the media type, perform the procedure in
"Selecting the Media Type" (→ P.2-32)
As soon as each sheet prints, remove it from the
output stacker.
Note
Before shipping a printer, the Media Type is set for
Plain Paper. Also, when the release lever is opened
and closed, the media type setting is reset
automatically to Plain Paper.
The media size is detected automatically, therefore no
setting for the size is required.
Adh. Syn. Paper
Backlit Film
Chapter 1
Flame-Res.Cloth
Basic Procedures
Proofing Paper 2
News Proof 1/2/3
Chapter 2
FineArt Photo
Using a Variety of
Media
FineArt Txtr
Canvas Semi-Gl
Chapter 3
JPN Paper Washi
Printing Methods for
Different Objectives
Colored Coated
CAD Trace Paper
Chapter 4
Maintaining the
Special 1~5
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
TOP
Contents
Index