Canon imagePROGRAF W6400 User Manual page 31

Function Menus
Menu Item
Roll Length Set
Nozzle Check
Stop Ink Check
Sleep Timer
Use Power Save
Length Unit
1- 28
Setting Values
## m (meter selected for Length
Unit), ## feet (feet/inch selected for
Length Unit), Manual Setting,
Unknown
1 page, 10 pages*, Nozzle check
Bk Ink Tank
PC Ink Tank
C Ink Tank
PM Ink Tank
M Ink Tank
Y Ink Tank
5 min., 10 min., 15 min.*, 20 min.,
30 min., 40 min., 50 min., 60 min.
On, Off
meter*, feet/inch
Function
When the roll supply remaining detection
function is On, the printer sets the media length
when the roll media loaded has no bar code.
This is displayed only when Chk Remain. Roll
is On. Some Length Units are displayed in
meters, and others in feet depending on the
setting. Also, if Manual Setting is selected you
can enter the length directly.
If Unknown is selected, the roll supply remains
function is switched Off.
Allows you to set the number of patterns to
print when a nozzle clogs during an
automatic check.
Switches off the ink level detection function.
(→ P.4-8)
Sets the amount of time the printer remains
idle before it enters sleep mode.
Sets up the printer sleep mode function. If
set to On the printer enters the Sleep Timer
mode to reduce its power consumption and
conserve energy if the covers are closed and
the printer is neither operated nor receives a
print job after the prescribed time has
elapsed. If set to Off, sleep mode is
disabled. (→ P.1-9)
Sets the units used to display the length of
the roll sheet on the display. The units for the
roll length display and the roll supply
remains display are separate.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index