Canon imagePROGRAF W6400 User Manual page 322

NetWare Settings (Windows)
3
Select Network in the Device Manager
menu on the left.
The Network page appears.
4
Click the Edit... button to the right of
NetWare.
The Edit IPX/SPX Protocol Settings page appears.
5- 41
5
Check the Frame Type box and make sure
the setting is correct for your NetWare
network.
6
If you intend to use the burst mode, select
On for NCP Burst Mode.
Note
The burst mode is used in the queue server mode to
transfer data rapidly at very high speed during printing.
Normally, leave the setting on.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index