Canon imagePROGRAF W6400 User Manual page 303

Macintosh Network Settings
2
Confirm that Ethernet is selected for the
AppleTalk connection.
Start AppleTalk on Control Panel.
Select Ethernet.
Close AppleTalk to save the setting.
This completes the AppleTalk network settings for a
Macintosh.
Important
Be sure to select the Printer Port if Ethernet is
connected via LocalTalk.
5- 22
For Mac OS X
Confirm the AppleTalk settings with Network of System
Preferences.
1
Open Network under System Preferences.
2
At the Show setting select Built-in Ethernet.
3
Select the AppleTalk sheet and confirm that
Make AppleTalk Active is selected.
If this item is not checked, select it and then click the
Apply Now button.
4
Close Network to save the settings.
This completes the AppleTalk network settings for a
Macintosh.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index