Specifications - Canon imagePROGRAF W6400 User Manual

Specifications

Specifications
Print Features
Print Method
Print Modes
Max. Resolution
Interface
USB Interface
(USB 2.0 Standard)
Network Interface
(10base-T/100base-TX)
IEEE1394 Interface
(IEEE1394.a standard)
Interface Connector
Printhead
Nozzle gaps
Number of nozzles
1- 56
Serial Bubble Jet
Highest (Custom Settings) High, Standard, Draft
2400 x 1200 dpi
1
(If the computer port, operating system, or USB cable does not support USB 2.0 High Speed
Mode, you will not be able to use High Speed Mode.)
*2
Option
*2
Option
USB Interface: USB Standard Series B Receptacle
USB Interface Recommended Printer Cable:
Material: AWG28 or above
Type: Twisted-pair sealed cable (high speed mode compliant)
Length: max. 5.0 m (4.9 yd.)
Connector: USB Standard Series B Plug
IEEE1394 Interface (option): IEEE1394-1995 Standard 6-pin (without feed)
IEEE1394 Interface Recommended Printer Cable
Material: AWG28 (signal) AWG22 (power)
Type: Dual twisted pair shielded cable (100, 200, 400 Mbps mode compliant)
Length: max. 4.5 m (4.9 yd.)
Connector: IEEE1394-1995 Compliant 6-pin
Replaceable Printhead BC-1350
1200 dpi (600 dpi x 2 lines)
1280 nozzles x 6 colors
W6400
*1
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index