Canon imagePROGRAF W6400 User Manual page 277

Reducing the Amount of Cutting Dust
5
Press [ ] or [
CutDustReduct. then press [
Backlit Film
CutDustReduct.
6
Press [ ] or [
setting then press OK button.
To switch the cutter dust reduction function on for the
selected media type, select On or to release the
function for the media type select Off.
CutDustReduct.
On
The selection is prefixed with an equals sign (=) to
denote that the cut waste reduction function is
selected.
4- 46
] to display
].
↓
] to select a value for the
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index