Canon imagePROGRAF W6400 User Manual page 227

Printing from Macintosh
5
Click the New button to define the user
defined name, the media size and margins
(for OS 8/9 click, define the user defined
name, media size and other settings, then
click the Add button).
Note
When you select the desired size and name from the
Media Size list on the left, the Width (Wid. for OS 8/9)
and Length (Hght for OS 8/9) are entered
automatically.
For OS 8/9, If Borderless Printing is selected, the
selection for Wid. changes automatically to a roll width
list that supports borderless printing. Select a Wid.
setting for the width of the desired roll, then enter a
number for the Hght that you want. (This function is
not provided for OS X.)
3- 123
6
Click the Save button. (Not required for OS
8/9)
7
Click the OK button to close the dialog box.
Note
If you are using OS 8/9 you are allowed to store up to a
maximum of 5 custom settings.
The settings in the Custom Paper Size panel (Media
Design for OS 8/9) box remain in effect even after the
software application is closed.
To delete a registered custom size, select the name of
the custom size to delete, then click the Delete button.
To edit a registered custom size, select the name of
the custom size, then input the Width and Height
settings again. (this editing and correction cannot be
performed for OS 8/9)
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index