Canon imagePROGRAF W6400 User Manual page 323

NetWare Settings (Windows)
7
For Print Application select the service to
use.
Note
Here we will show only one service selected and
enabled. More than one service cannot be enabled at
the same time.
8
When using the packet signature settings, for
Packet Signature be sure to select If
Requested by Server.
5- 42
9
Perform the following settings as required for
the selected service.
Bindery PServer Selected: Queue Server Mode
(Using a Bindery Print Server)
Enter the file server name into File Server
Name.
For Print Server Name, enter the name of the
print server created in
→
Print Service" ( P.5-37).
For Print Server Password, enter the print
server password created in
NetWare Print Service"
Set the Polling Interval. Set the time interval
for the printer to confirm the NetWare print
queue.
RPrinter Selected: Remote Printer Mode (using a
Bindery Print Server)
For Print Server Name, enter the advertised
name of the print server created in
a NetWare Print Service"
For Printer Number, enter the same printer
number that you entered in
NetWare Print Service"
"Setting Up a NetWare
"Setting Up a
→
( P.5-37).
"Setting Up
→
( P.5-37).
"Setting Up a
→
( P.5-37).
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index