Switching The Printer On And Off - Canon imagePROGRAF W6400 User Manual

Switching the Printer On and Off

Switching the Printer On and Off
Follow the procedure below to switch the printer on and off.
Note
Now we will show you examples of how to use the
printer for normal operations after it has been set up. If
you are not finished setting up the printer, first follow
the instructions in the Quick Start Guide to confirm the
setup and operation of the printer.
If the printer is connected to a Macintosh computer via
a USB cable and the computer has been shut down,
when the printer is switched on the computer may also
switch on.
If this occurs disconnect the USB cable. (You may be
able to solve the problem by connecting the printer and
Macintosh via a USB hub.)
Switching the Printer On
Switch on the printer before you execute a print job from the
computer.
1
Press the Power button.
Information Power
Data
Message
Cleaning
Stop/Eject
1- 7
(3 sec.)
(1 sec.) Online
Offline
Menu
Processing to prepare the printer starts after the
Online lamp and Message lamp start flashing. After
preparation processing is completed and media is
loaded, the Online lamp light, and the printer is
ready to print.
Information Power
Data
Online
Bk
Message
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
Offline
Menu
If no print media is loaded in the printer when the
printer is switched on, Offline is displayed and the
printer waits for you to load media in the printer.
Information Power
Data
Online
Load Roll Media
Message
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
Offline
Menu
If the Message lamp is flashing, read the message
on the printer operation display and take the
appropriate action. "Responding to Error Messages"
(→ P.6-2)
If the display or Online lamp do not light, check the
power cord connections at the printer and the power
supply and make sure that they are secure.
(→ Quick Start Guide)
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index