About The Switch 4300; Summary Of Hardware Features - 3Com SuperStack 3 Switch 4300 Getting Started Manual

12 C 1: I
HAPTER NTRODUCING THE
About the Switch
4300
Summary of
Hardware Features
S S 3 S
UPER TACK WITCH
The Switch 4300 is a 10/100 Mbps device that provides
high-performance work groups with a backbone to server connection.
The Switch 4300 allows Gigabit Ethernet or Fast Ethernet Fiber
connections when expansion modules are installed in the expansion slots
on the rear of the unit. You can also add the Switch 4300 to any
SuperStack ® system as your network grows.
Table 3 summarizes the hardware features that are supported by the
Switch 4300.
Table 3 Hardware features
Feature
Addresses
Auto-negotiation
Forwarding Modes
Duplex Modes
Flow Control
Traffic Prioritization
Ethernet and Fast Ethernet
Ports
SuperStack 3 Switch
Architecture
4300
Switch 4300
Up to 8000 supported
Up to 64 permanent entries
Supported on all ports
Auto MDI/MDI-X
Store and Forward
Half and full duplex supported on all ports
Supported on all ports
Supported (IEEE 802.ID): 4 queues per port
Auto-negotiating 10BASE-T/100BASE-TX ports
Type 2A Connector for a SuperStack 3 Advanced
Redundant Power System (ARPS) (3C16071B)
19-inch rack or stand-alone mounting