Displaying Rf Neighbors; Displaying Rf Attributes - 3Com 3CRWX120695A, 3CRWX440095A Configuration Manual

Displaying RF To display the other radios that a specific 3Com radio can hear, use the
Neighbors following commands:
display auto-tune neighbors [ap map-num [radio {1 | 2| all}]]
display auto-tune neighbors
[dap dap-num [radio {1 | 2 | all}]
The list of radios includes beaconed third-party SSIDs, and both beaconed
and unbeaconed 3Com SSIDs.
To display neighbor information for radio 1 on the directly connected
MAP access point on port 2, type the following command:
WX1200# display auto-tune neighbors ap 2 radio 1
Total number of entries for port 2 radio 1: 5
Channel Neighbor BSS/MAC
------- ----------------- ----
Displaying RF To display the current values of the RF attributes RF Auto-Tuning uses to
Attributes decide whether to change channel or power settings, use the following
commands:
display auto-tune attributes
[ap map-num [radio {1 | 2| all}]]
display auto-tune attributes
[dap dap-num [radio {1 | 2| all}]]
To display RF attribute information for radio 1 on the directly connected
MAP access point on port 2, type the following command:
WX1200# display auto-tune attributes ap 2 radio 1
Auto-tune attributes for port 2 radio 1:
Noise:
Count:
Utilization:
Count:
CRC Errors count:
1 00:0b:85:06:e3:60
1 00:0b:0e:00:0a:80
1 00:0b:0e:00:d2:c0
1 00:0b:85:06:dd:00
1 00:0b:0e:00:05:c1
0
Displaying RF Auto-Tuning Information
RSSI
-46
-78
-74
-50
-72
-92 Packet Retransmission
0 Phy Errors
0
122
203