Displaying Line Build-Out Definitions - Paradyne HotWire 7914 User Manual

Customizing DSX-1-Compatible Units

Displaying Line Build-Out Definitions

4-6
Press any key at the <<Press a key to continue!>> prompt to display the
switchpack S5 settings for line build-out. Use this information to change the line
build-out parameter manually. (Switchpack definitions are also listed in
Appendix C, Switchpack Definitions
S3 S2 S1 LBO SETTING
–––––––––––––––––––––––––––––––––––––
0 0 0 0 to 133 feet – 0dB
0 0 1 133 to 266 feet
0 1 0 266 to 399 feet
0 1 1 399 to 533 feet
1 0 0 533 to 655 feet
1 0 1 -7.5 dB
1 1 0 -15 dB
1 1 1 -22.5 dB
Config
For example, to change the line build-out to 399 to 533 feet, while in Switchpack
Mode, set position 3 OFF and positions 1 and 2 ON.
NOTE:
The switch combinations for –7.5, –15, and –22.5 dB line build-out are not for
use with this product. Use of these settings will cause a weak signal and
degrade performance.
February 1998
.
7914-A2-GB20-00