Table of Contents
Advertisement
36
Selecting your genlock source
Chapter 4: Configuring Your DigiSuite Cards and VTR Settings
To select the source to which you want to genlock all devices for a given
card set, click the card set's tab, such as
Different genlock options are available depending on whether DigiMix,
DigiLinx, or DigiVid is the genlock master for the card set, as indicated
in the
Master Information
Note
The genlock master is automatically set when you install the
DigiSuite card drivers, and cannot be changed using the DigiSuite
Configuration program.
The following sections explain the genlock options for each card.
Genlock options for DigiMix
When DigiMix is the genlock master, you may select one of the following
genlock options:
q
External Broadcast Quality
connected to REF IN on DigiMix. This is the only genlock option
that ensures frame-accurate editing.
q
External VTR Quality
REF IN on DigiMix, such as your composite input to DigiMix.
q
Genlock to DigiMix's internal reference signal. Select this
Internal
option only if you don't have an external sync source.
Card Set 1
box.
Genlock to an external sync generator
Genlock to your source VTR connected to
, then the
tab.
General
Advertisement
Table of Contents
