Upload And Download Files By Using The Secure Copy Command - Digi IX20 User Manual

File system
4. Browse to the location of the file on your local machine. Select the file and click Open to
upload the file.
Download files
Log into the IX20 WebUI as a user with full Admin access rights.
1. On the menu, click System. Under Administration, click File System.
The File System page appears.
2. Highlight the directory to which the file will be uploaded and click  to open the directory.
3. Highlight the appropriate file and click  (download).

Upload and download files by using the Secure Copy command

Copy a file from a remote host to the IX20 device
To copy a file from a remote host to the IX20 device, use the
> scp host hostname-or-ip user username remote remote-path local local-path to
local
where:
n hostname-or-ip is the hostname or IP address of the remote host.
n username is the name of the user on the remote host.
n remote-path is the path and filename of the file on the remote host that will be copied to the
IX20 device.
n local-path is the location on the IX20 device where the copied file will be placed.
For example:
To copy firmware from a remote host with an IP address of 192.168.4.1 to the /etc/config directory on
the IX20 device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/IX20-23.9.74.0.bin
local /etc/config/scripts to local
IX20 User Guide
Upload and download files
scp command as follows:
1074