7700 MultiFrame Manual
7711HDC HD Broadcast Quality Down Converter
5.
CARD EDGE CONTROLS
The 7711HDC series modules are equipped with an 8 position DIP switch to allow the user to select
various functions. All positions are assigned sequentially such that the DIP switch 1 is located at the top
of the DIP switch (farthest from the card ejector). Table 5-1 gives an overview of the DIP switch functions.
Sections 5.1 to 5.2 describe the assigned DIP switch functions. The On position is down, or closest to the
printed circuit board. There is also a toggle switch and pushbutton which are used to navigate the on
screen menu. (See section 6)
5.1.
DISABLING THE ON SCREEN DISPLAY ON THE PROGRAM VIDEO OUTPUTS
DIP switch 1 determines whether the On screen menu display will be shown on the Program SDI outputs
and the broadcast analog outputs (on the 7711HDC-SN-EAES4 version).
DIP 1
Off
On
(default)
5.2.
CONTROLLING THE OUTPUT VIDEO STANDARD ON LOSS OF VIDEO
DIP switch 2 controls the behaviour of the down converter when there is no input video.
DIP 2
Off
On
7711HDC - 10
DIP Switch
Function
1
On screen display on program out
2
Default video standard when no video in
3
4
5
Reserved for future use
6
7
8
Table 5-1: Overview of DIP Switch Functions
DESCRIPTION
On Screen Menus disabled on program video outputs
(SDI OUTPUT and ANALOG OUTPUT). On screen
menus will only be on the analog MON OUT outputs.
On Screen Menus enabled on program video outputs
(SDI OUTPUT and ANALOG OUTPUT) and the analog
MON OUT outputs.
Table 5-2: On Screen Display Control Switch Settings
DESCRIPTION
Output 525i/59.94 (NTSC) video on loss of input video.
Output 625i/50 (PAL) on loss of input video.
Table 5-3: Default Video Switch Settings
Revision 1.1