7700 MultiFrame Manual
7710UC-HD HD UpConverter
4.1.
AUDIO STATUS LEDS
Four LEDs located on the lower end of the module (near the card extractor) indicate which audio groups
are present in the input video. Audio group LED 1 is located closest to the center of the module.
Audio Group
Colour
LED
1
Off
Green
2
Off
Green
3
Off
Green
4
Off
Green
5.
CARD EDGE CONTROLS
The 7710UC-HD series modules are equipped with an 8 position DIP switch to allow the user to select
various functions. All positions are assigned sequentially such that the DIP switch 1 is located at the top
of the DIP switch (farthest from the card ejector). Table 4 gives an overview of the DIP switch functions.
Section 5.1 describes the assigned DIP switch functions. The On (closed) position is down, or closest to
the printed circuit board. The Off (open) position is up, or farthest from the printed circuit board. There is
also a toggle switch and pushbutton which are used to navigate the on screen menu. (See section 6)
7710UC-HD-8
Audio Group Status
No group 1 present on input video.
Group 1 present on input video.
No group 2 present on input video.
Group 2 present on input video.
No group 3 present on input video.
Group 3 present on input video.
No group 4 present on input video.
Group 4 present on input video.
Table 3: Audio Group Status LEDs
DIP Switch
Function
1
2
Output Video Standard
3
4
5
6
Reserved for future use
7
8
VistaLINK™ Control Enable
Table 4: Overview of DIP Switch Functions
Revision 1.3