Table of Contents
Advertisement
3
HOW TO OPERATE THE XDS ENCODER
3.1
AN OVERVIEW OF KEY AND DISPLAY FUNCTIONS
Throughout this manual SHIFT + indicates that you should hold down the
SHIFT key while pressing a second key.
OPERATION
8083XDS-AD Analog and SD-SDI XDS Encoder
Figure 3-1: 8083XDS-AD Front Panel Layout
The display area consists of a 16 digit alphanumeric display, six LED status
indicators and a ten pushbutton keypad.
A menu system provides a quick and simple method of configuring the
XDS Encoder directly from the front panel. The keypad is used to control
the menu system, and to provide a global Keyer disable. When the SHIFT
key is held down, the meanings of some of the keys are modified, gaining
quick access to a wider variety of functions.
The remainder of section 3.1 gives an overview of the XDS encoder
operation.
Sections 3.2 and following give detailed information on the
specific operations required to control the device.
3.1.1
Navigating the Front Panel Menus -- The Setup Group
The menu systems use the 16 digit alphanumeric display and the Setup
key group (SELECT, SETUP,
There are two menu systems used to configure the XDS encoder. Users
will most often use the Setup menu, which is accessed by pressing the
SETUP key. The Setup menu is used to configure the basic operation of
the XDS Encoder. There is also an Engineering menu, which contains
items not normally required during normal operation. To enter the
Engineering menu press the SHIFT + SETUP keys.
To navigate within the menu system, press the
next menu item. When you have chosen the desired menu item, press the
or
keys to view the options available for that menu item.
currently selected setting will be flashing. When you have chosen the
desired setting for the menu item, press the SELECT key to save that
value.
Revision 1.0.2
) to configure the XDS encoder.
or
keys to move to the
The
Page 3-1
Advertisement
Table of Contents
